Surge or Lightning Arresters: Protect Your Equipment from Electrical Surges
In this context, electrical equipment forms an important part of any industry. Hence, protection against electrical surges gains prime importance for safeguarding such costly assets. These surge or lightning arresters are protective devices that prevent electrical system damage by the dangerous voltage spikes emanating from causes both internal as well as originating from external forces like lightning strikes and power surges.
At Rudra Electro Power Technologies, we bring to you the best in surge and lightning arresters. They will be keeping your electrical systems safe as much as they are functional. Now that we have built up our case on why it all matters, let us break it down by understanding first what surge or lightning arresters are and why you must consider them for your setup.
What are Surge or Lightning Arresters?
Surge arresters, popularly known as lightning arresters, protect electrical equipment and infrastructures from outer source transient overvoltages caused by lightning or similar electrical faults. This surge arrester basically performs the function of channeling excessive voltage to ground so that it cannot harm any electrical system which may be attached to it.
How Do They Work
In the event of voltage surges, it provides a low-resistance path to the ground, allowing the excess voltage to safely dissipate. Such action protects equipment as a result. After surges pass, arrester reverts back to its original state in self-clearing fashion and is ready to protect against the next surge. Surge arresters are typically mounted on high-voltage power lines, transformers, circuit breakers, and other main electrical infrastructure components.
Why install a surge or lightning arrester?
In any business or industry nowadays, with sensitive and sophisticated electrical systems, continuity of supply is absolutely vital. Electrical surges may bring unacceptable consequences, including system failure, and costly equipment damage and downtime. A preventive measure against all these risks is installation of a surge arrester.
Why invest in surge arresters?
There are many reasons why you should spend on your house or place with surge protectors. Here are the best ones.
1. Protect your equipment
Electrical surges can cause irreparable damage to the expensive industrial and commercial equipment. Surge protectors protect these assets with neutralizing the excess voltage.
2. Improve System Reliability:
Electrical surges may cause downtime thereby lowering your company's productivity. On this point, you keep your systems up and running with the installation of surge protectors.
3. Cost Savings:
Lightning arresters shield your electrical system against damage, thus saving you from expensive repair costs and buying new equipment.
4. Safety:
Surge arrester limits the chances of electrical accidents and fires caused by surges in high voltage.
Why Lightning or Surge Arresters?
Surge arresters bring you the above advantages which will promote your electrical system's performance and safety level. The advantages include:
1. Increase of Equipment Life: It increases the longevity and efficiency performance of equipment by protecting your equipment from voltage spikes.
2. Minimized Shutdown Time: Surge arresters reduce disturbances in your activities caused by power surges, hence leading to a higher productivity level.
3. Protection against Acts of Nature: In certain instances, lightning causes maximum damage to electrical systems when not checked in its tracks, but the surge arresters divert this excess voltage away from your infrastructure.
4. Sleep Better: With the right surge protection, you can rest assured that your systems are well protected from any unforeseen electrical events.
Do's and Dont's of Surge or Lightning Arresters
DO's
● Do ground properly: Surge arresters work only if they are properly grounded. Installation should be carried out right, and regular maintenance is performed.
● Do mount at key points: Mount surge arresters on the electrical system where it is most vulnerable, like transformer areas, circuit breaker panels, and switchgear.
● Periodic maintenance: Like any other protecting device, the surge arrester must be checked periodically to determine whether it is operating within anticipated parameters.
Dont's:
● Don't overlook manufacturer guidelines: Read and heed what the manufacturer has to say regarding installation of surge arresters, ratings to be done for respective voltages, and any maintenance requirements specified.
● Avoid exposure of fragile equipment: Another set of systems are the control panels and IT infrastructure, which should not be exposed either.
● Never use burnt or damaged arresters: When a surge arrester has been subjected to a high voltage, it is always recommended that you replace it immediately due to the fact that its function may have been impaired.
Who should invest in Surge or Lightning Arresters?
Surge or lightning arresters are very crucial in many industries and applications. Below is who should invest in these devices:
1. Surge-Protective Devices for Specific Industries that May Face a Huge Threat of Destruction caused by Power Cuts:
Industrial plants, data centers, hospitals and other companies that have to operate should invest in surge protectors.
2. Organizations located in Storm-prone Regions:
If your region is frequently and heavily attacked by frequent thunderstorms, you must install surge arresters to avoid damage caused by a lightning strike.
3. Companies using Costly Apparatus:
Business that use expensive, brittle apparatus, like laboratory or IT companies should install surge arresters to avoid damage caused by voltage swings.
4. Utility Suppliers:
Companies engaged in power generation and distribution should ensure surge protection of their apparatus and structures.
Important Things to Keep in Mind when Making a Choice Surge or Lightning Arresters
1. Voltage Rating: Make sure that the type of arrester you choose aligns to your system's voltage.
2. Environment: Take into consideration in which environmental conditions it will be installed, that is, temperature, humidity exposition to elements .
3. Type of System: Select surge arresters intended specifically for the type of system you are going to protect, the application to be low-voltage or high-voltage.
4. Standards: The standards used by the surge arresters should be of appropriate standards for safety and industrial standards such as IEEE or IEC.
5. Maintenance Requirements: Choose surge arresters that have low maintenance requirements but can easily be checked if they need to be maintained.
How to Identify a Suitable Vendor for Surge or Lightning Arresters
The selection of the right supplier of surge arresters to ensure long-term success is dependent on that. What you will look for in a company:
1. Industrial Experience: You need to opt for a company, such as Rudra Electro Power Technologies, which has ample time experience in the field of surge protection business, thereby knowing the minute details of electrical systems and surge protection.
2. Quality Products: The companies you must opt for have their surge arresters designed and manufactured according to industry standards and made to last.
3. After Sales Support toward Customers: You should have a company, which you think supports post-installation services well and gives maintenance services for the electrical installations along with troubleshooting.
4. Customized: Each and every electrical installation is different, and therefore, you have to hire a company that can provide you specific surge protection solutions customized according to your needs.
5. Good track record: The selected company should have successfully supplied surge arresters to various industries and have a good, positive client review.
Conclusion
Surge or lightning arresters are investments that any firm must make on its journey to protect its electrical installation from surges. Proper devices therefore mitigate damage to equipment, reduce downtime and also improve safety in the process.
Available as SURGE and LIGHTNING ARRESTERS from Rudra Electro Power Technologies, the high-end surge protection products designed suit various industry demands. Protect assets, designs that guarantee not only the longevity but also safety of electrical systems.
